CVD/MKD dressing plates
AUDIA dressing plates ...
... ideally suited for dressing straight grinding wheels.
... substitutes for expensive profiling diamonds in many cases of application.
... adapts perfectly to existing machinery – with either swivel holder or fixed shanks. The produced surface roughness on the grinding wheel can be controlled by modifyinig the dressing feed.
Dressing plates with CVD- or MKD-rod
grit of wheel | ||||||
---|---|---|---|---|---|---|
effectice width (mm) | 120-180 | 80-120 | 54-80 | 64-80 | <46 | |
0,4 | x | |||||
0,6 | x | |||||
0,7 | x | |||||
0,8 | x | |||||
1,0 | x |
dimension of wheel (mm) | ||||||
---|---|---|---|---|---|---|
numbers of rods | ∅ <300x50 | ∅<300x80 | ∅<600x150 | ∅>600x220 | ||
02 | x | |||||
03 | x | |||||
04 | x | |||||
05 | x |
typical dimension of rods (mm) | ||||||
---|---|---|---|---|---|---|
lateral cut (mm) | effective width straight (mm) | effective width diagonal (mm) | usable length CVD (mm) | usable lenght MKD (mm) | ||
0,4 x 0,4 | 0,40 | 0,57 | 5,00 | 4,00 | ||
0,6 x 0,6 | 0,60 | 0,85 | 5,00 | 4,00 | ||
0,7 x 0,7 | 0,70 | 0,99 | 5,00 | 4,00 | ||
0,8 x 0,8 | 0,80 | 1,13 | 5,00 | 4,00 | ||
1,0 x 1,0 | 1,00 | 1,41 | 5,00 | 4,00 |

orientation of rods diagonal
W = effective width

Orientation of rods straight
W = effective width
Order References
PBD - KM - A04080806
plate dimension | orientation of the rods | binder | orientation platelets | rod type | number | width in tenth of millimeter | height in one tenth of a millimeter | lenght in millimeter |
---|---|---|---|---|---|---|---|---|
PB | D | K | M | A | 04 | 08 | 08 | 06 |
Order References
PBD - KM - A04080806 - 010
plate dimension | orientation of the rods | binder | orientation platelets | rod type | number | width in tenth of millimeter | height in one tenth of a millimeter | lenght in millimeter | shank |
---|---|---|---|---|---|---|---|---|---|
PB | D | K | M | A | 04 | 08 | 08 | 06 | 010 |
Order References
PBD - KM - A04080806 - 010 - 10° - left
plate dimension | orientation of the rods | binder | orientation platelets | rod type | number | width in tenth of millimeter | height in one tenth of a millimeter | lenght in millimeter | shank | angle | decline |
---|---|---|---|---|---|---|---|---|---|---|---|
PB | D | K | M | A | 04 | 08 | 08 | 06 | 010 | 10° | left or right |